[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: starting RSG
Original poster: "BunnyKiller by way of Terry Fritz <twftesla-at-qwest-dot-net>" <bigfoo39-at-telocity-dot-com>
Tesla list wrote:
>Original poster: "C.L. Mayeux by way of Terry Fritz <twftesla-at-qwest-dot-net>"
>Ok, while rummaging through the junkbox(es), I found a motor that would
>be perfect to use in an RSG. Problem is, to make it work, I need to
>find a motor arbor that will accommodate a 3/8" shaft. So far, the only
>one's I've seen in the hardware stores will do 1/2". I have another
>motor (with arbor) that would work (used to be my grinder), but I'd
>rather not disassemble that if I don't have to, because I'd rather use
>the one with the 3/8" shaft... it's smaller, and pulls a LOT less amps
>from the power line (not to mention, it's split-phase, so it's easy to
>reverse it if I need to). My question is, does anyone here know of a
>source of 3/8" arbors?
>Owner, MSB Data Systems
try sears mini catalog for farm equipment...