Re: OLTC - Ready :-))

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gregory Peters by way of Terry Fritz <twftesla-at-qwest-dot-net>" <s371034-at-student.uq.edu.au>

Terry,

How can you wait another day?!? It's so close!!!

Good Luck!!

Greg.

Quoting Tesla list <tesla-at-pupman-dot-com>:

> Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>
> 
> Hi All,
> 
> Tonight I wound the secondary:
> 
> 	http://hot-streamer-dot-com/temp/OLTC08-23-03.jpg
> 
> 46 inches of #28 wire...  Fortunately, the winding jig worked
> perfectly
> ;-))  Took about three hours total, but mostly fiddling.
> 
> Rather than coat it with polyurethane, I wrapped it with that
> shipping
> stretch wrap stuff.  Seems to work great and will protect the
> wire.
> 
> 	http://hot-streamer-dot-com/temp/OLTC08-23-04.jpg
> 
> So here is the entire coil:
> 
> 	http://hot-streamer-dot-com/temp/OLTC08-23-05.jpg
> 
> It all weighs 37 pounds total.  Tuning seems pretty close
> right now but I
> will have to test all that more tomorrow.
> 
> So all the hardware is there and it's ready to start testing
> :-)))
> 
> Cheers,
> 
> 	Terry
> 
> 
>