[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Coil form
Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>
Polystyrene, polypropylene, polyethylene, PVC, or fiberglass works good.
Coat with 2-3 coats of glyptal (elec. motor rewind shop) inside and outside
prior to winding.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
Sent: Monday, August 26, 2002 6:14 PM
Subject: Coil form
> Original poster: "Calvin Patrick by way of Terry Fritz
> What's the best material to use for a secondary form?
> Calvin Patrick
> ICQ#: 125694645
> More ways to contact me: http://wwp.icq-dot-com/125694645