Re: Hows the flat coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Goinbonkers-at-aol-dot-com>

Hi Terry, 
   I don't know if you visited this site, but they have magnet wire with an
adhesive coating that will set itself with baking. 
<http://www.mwswire-dot-com/magwire.htm>Select a Magnet Wire category 
Look at the bondable wire. 
Might be the answer to this.  Don't know the cost. 
Mike 

>
> Maybe very thin coats of poly but you can't go pushing the wire back down 
> if it goes bad.  Since the wires like to lift, fast drying would be a big 
> plus... 
>
> Cheers, 
>
>    Terry