[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Original poster: "Matthew Smith by way of Terry Fritz <twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>
Despite a cold (and late) start to the summer down here in South
Australia, it's looking today to hit into the thirties (high nineties,
low hundreds of your Earth Farenheits ;-) ), with a humididy of, well,
the hygrometer has just shrivelled up and turned to dust ;-)
Which brings me to my question...
Assuming a hot and dry climate, at what voltage (AC and DC) should I
start worrying about corona and start spraying Conformal Coatings or
dunking in oil?
KBC, PO Box 150, Kadina, 5554, S. Australia
Ph: (08) 88 212 395 Fx: (08) 82 190 157