[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: TC voltage?



Original poster: "Jason by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

TC voltage isnt really done in volts - it is done in inches :) a good start
is the square root of the power x 1.2 if its badly made, and the square root
of the power x1.7 if its well made. You can generally work on 30KV/inch, so
for a foot its about 300KV, for 3 feet its about 1MV... you get the idea.

Best Regards,
Jason

{UK Geek #1139 ¬ G-2}
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, January 10, 2002 3:02 PM
Subject: TC voltage?


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Beans45601-at-aol-dot-com>
>
> I am building a TC and I would like to have an estimate of the voltage it
will
> put out before I build it. It is a 15000 volt NST. The primary is going to
have
> 15 turns and the secondary is going to use 2 pounds of #24 magnet wire
around a
> 24" x 4.5 " PVC pipe. Is there an equation that I could use to find this
out,
> or, do I just have to guess?
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>