Re: MOT spec data tests & question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Godfrey,

A MOT I have is 1860 VACrms open load and 1.40 AACrms into a short.

Cheers,

        Terry

At 09:33 PM 7/13/2002 +1200, you wrote: 
>
> Interesting tests to report
>  
> Wanted to know the pk current O/P of a MOT to calculate minimum time between
> bangs on the SRSG.
>  
> Standard 900w Mwave MOT tested
>  
> Isec into S.C 1.7A rms
> Isec feeding 22nF with static gap across cap to obtain a discharge near Vpk.
> Ipk was over 3A after S.G had fired.
>  
> Method used measure V across 1ohm res inserted at eth end of cct measured V
> across the 1ohm.
> Has anybody replicated these figures ?
> Best
> Ted L in NZ