[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Digital images, motor mods



Original poster: "Mr Gregory Peters by way of Terry Fritz <twftesla-at-qwest-dot-net>" <s371034-at-student.uq.edu.au>

Steve, All,

Thanks for your kind words. Yes the motor was modified as per the usual
technique. The flats are actually pretty small (about 1/3 diameter of
the rotor, the size has escaped my memory). The stationary electrode
holders aere made with simple rectangular section Al tube and angle
brass. I couldn't afford to machine solid copper blocks, etc.

Cheers,

Greg Peters
Department of Earth Sciences,
University of Queensland, Australia
Phone: 0402 841 677
http://www.geocities-dot-com/gregjpeters