[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SW bucket cap detail
Original poster: "by way of \"Terrell W. Fritz\" <terrellf-at-qwest-dot-net> by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dan.gallagher-at-pulsartech-dot-com>
Hi Terry, I'm trying sending this to you to see if it works. I need to know
about this topic. I want to get going forward with my TC.
----- Forwarded by Dan Gallagher/PulsarNotes on 06/12/2002 11:25 AM -----
|--------+------------------------>
| | Dan Gallagher |
| | |
| | 06/10/2002 |
| | 12:52 PM |
| | |
|--------+------------------------>
>---------------------------------------------------------------------------
-----------------------------------------------------------------|
|
|
| To:
Tesla-at-pupman-dot-com
|
|
cc:
|
| Subject: SW bucket cap
detail
|
>---------------------------------------------------------------------------
-----------------------------------------------------------------|
Hi folks,
Are we having fun yet? Hopefully soon..........
I started out this past weekend in building my bucket cap(s). The
directions from the geek group's site are great except for one thing. I
understand how one connection just hangs into the bucket but the OTHER
connection is what I'm curiouis about. Does the
bottle-connection-to-the-outside-world connect to ONE bottle or multiple
bottles on the inside? Do I just put a wire down the center of a bottle for
the other of the two outside connections, or hook to a connecting wire? Or
tap off of a few? This point was the only thing I couldn't get out of the
site's instructions.
Plus, I'm using 10ga. solid copper wire (I found a bunch of), to connect
the bottles, is that ok? And is galv. plumber's strap ok for the "neg.?"
side hanging in the bucket? Can I put the outside connections on either
side of the bucket, rather than one on top and one on the side?
Thanks a bunch!
Getting Closer..........
Dan
Ft. Lauderdale