[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Knob and dial face



Original poster: "jmora by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jmora-at-jetlink-dot-net>

Hello,

I'm not sure of stock; but, I ordered a nice knob here for my variac.
http://www.leedselect-dot-com/parts.html#knobs
Bore a 3/8" to 1/2" ?

Jim Mora
Ojai, Ca

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, June 22, 2002 9:49 PM
Subject: Knob and dial face


> Original poster: "Ben McMillen by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<spoonman534-at-yahoo-dot-com>
>
> Hi all,
>   Does anyone have or know where I can get a sizeable knob
> ( Larger than 3" in diameter ) and a matching dial face
> that goes up to 220V? It has to fit a 1/2" shaft.. it's for
> the voltage variac in my power cabinet.. ;)
>
> Thanks for any help!
>
> Coiling in Pittsburgh
> Ben McMillen
>
>
>