[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

HV resistors for MMC



Original poster: "Sean Taylor by way of Terry Fritz <twftesla-at-qwest-dot-net>" <taylorss-at-rose-hulman.edu>

I don't know if anyone has brought up these resistors before, but I was
looking around on digikey, and found these: MOX400J-10M-ND,
http://www.ohmite-dot-com/catalog/pdf/v_minimox.pdf, they are the mox-400-23,
the epoxy coated ones.  Currently only $4.80 for 50 of them, not too bad.
Anyone use these before? Don't know why they wouldn't work, they're rated at
3/4 W, and 2500 V!

Sean Taylor