[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MMC bleeder question and SWC question



Original poster: "Shaun Epp by way of Terry Fritz <twftesla-at-qwest-dot-net>" <scepp-at-mts-dot-net>

Hello Andy,

Check back about a month ago on the list archives, I asked the same
questions about bleeder resistors.  Allied Electronics has some good ones
made by BC Components.  Their web site is www.alliedelec-dot-com
The resistors are 10Mohm  3.5Kv rated, style VR37,  part number is 649-5154,
and they come in a package of 100.

BTW.  I'm currently putting mine together now,  I'm putting rubber surgical
tubing over them so that I don't get any flashovers to the leads or resistor
body.

Hope this helps,
Shaun Epp


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, March 25, 2002 6:32 PM
Subject: MMC bleeder question and SWC question


> Original poster: "Andy Cobaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<kb3ewy-at-rcn-dot-com>
>
> 1)    What kind of bleeder resistors should I use for Geek Group Caps (a
> DigiKey part #?)
> 2)    Has ayone ever used Snapple bottles for a SWC?  If so, what kind of
> capacitance did you get and what was your setup for            them.  Are
they
> strong enough to take the HV?
>
> Andy, KB3EWY
>
<http://users.rcn-dot-com/tcobaugh/andy/tesla.htm>http://users.rcn-dot-com/tcobaugh
> /andy/tesla.htm
>