[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Series or Parallel???



Original poster: "rheidlebaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rheidlebaugh-at-zialink-dot-com>

Diodes in series gives more voltage. diodes in parallel gives more current.
As your voltage is over 1 Kv you connect them in series.
  Robert  H 

> From: "Tesla list" <tesla-at-pupman-dot-com>
> Date: Mon, 25 Mar 2002 17:37:24 -0700
> To: tesla-at-pupman-dot-com
> Subject: Series or Parallel???
> Resent-From: tesla-at-pupman-dot-com
> Resent-Date: Mon, 25 Mar 2002 17:49:41 -0700
> 
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <network-at-neXband-dot-com>
> 
> In the diagram of the link below, you can either use a microwave oven
> diode or 12 1N4007 diodes.  Can someone tell me if you use 12 1N4007's, do
> you use these in series or parallel?
> http://hot-streamer-dot-com/greg/motpic.htm
> 
> 
> 
> Thanks for the info!
> Gregg
> 
> 
>