[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Enough pork in this pig??? (Pics)



Original poster: "Sean Taylor by way of Terry Fritz <twftesla-at-qwest-dot-net>" <taylorss-at-rose-hulman.edu>

It looks like this pig does have a way of changing the output voltage
on the "primary" or HV side.  The plate has the schematic drawing that
shows a total of four coils, two 120V, and two 7200V coils, probably. 
If the high voltage coils were hooked in series rather than parallel,
you could get 14400 out of it.  Don't know if it definitely is
possible to change it, but it looks like it is.

Sean Taylor


-------------------
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<network-at-nexband-dot-com>
> 
> I snapped some pics of that xfrmr today and maybe we can get a fix
on what
> the heck this thing will put out.  Some pics are ok and some not as
clear.
> Hope this helps!
> 
> The pics are located at..........
> 
> http://user.intop-dot-net/~network/
> 
> 
> 
>