[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: depotting

To: tesla-at-pupman-dot-com
Subject: Re: depotting
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 24 May 2002 19:14:02 -0600
In-Reply-To: <20020525001411.23319.qmail-at-web12507.mail.yahoo-dot-com>
References: <4.1.20020524081240.00a1bbb0-at-pop.dnvr.qwest-dot-net>
Resent-Date: Fri, 24 May 2002 19:23:48 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <YhmoUC.A.r3E.ieu78-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Jimmy,

If it is really hard, it's probably an epoxy resin.  You are not going to
be able to dissolve it with amateur chemicals.

If it is soft, it is probably a silicone material that may pull and break
away with some careful force.  No household chemical will dissolve that either.

Cheers,

	Terry

At 05:14 PM 5/24/2002 -0700, you wrote:
>
> i have a flyback  transformer from an old monitor but
>i cant see the windings because it is potted. what
>kinds of solvents are usually used?
>
>=====
>JImmy
>

References:
- Re: SS MOT's
  - From: "Tesla list" <tesla-at-pupman-dot-com>

Prev by Date: Re: uses for a Tesla Coil?
Next by Date: depotting
Prev by thread: Re: SS MOT's
Next by thread: TC electrocution?
Index(es):
- Date
- Thread