[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Isolation transformer - MOT?



Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Matthew,

Yes, you can make an isolation transformer as you described it.  It will
probably not be as efficient as commercial ones due to skimping on the core
to save manufacturing costs.  The other easier way to make an isolation
transformer is to run a pair of MOTs back to back:  hook the secondaries
together, run power into one primary, and take it out of the other primary.
Wastes a few more watts & is heavier, but it saves a lot of work.

--Steve
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, May 25, 2002 9:38 AM
Subject: Isolation transformer - MOT?


> Original poster: "Matthew Smith by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>
>
> Hi All
>
> The joys of living in a small country town!  Only two shops sell
> microwave ovens and only one does their own repairs.  The result is a
> stream of similar ovens (Panasonic) with *identical* transformers, caps,
> diodes, etc.  (Collect enough and you can make a working one.)
>
> Not the real reason for my post though...
>
> If I have two identical transformers, what is the feasability of
> removing the secondary from one and replacing with the primary from the
> other?  Would this give me a decent 1kVA isolation transformer?
>
> I rather like the idea of running my bench supply through one with a
> heck of a lot of filtering - stop SSTC signals showing up where they're
> not wanted.
>
> Cheers
>
> M
>
> --
> Matthew Smith           |   _     ASCII Ribbon Campaign
> IT Consultant           |  ( )  - No HTML/RTF in e-mail
> Kadina, South Australia |   X   - No Microsoft docs in e-mail
> http://www.kbc-dot-net.au   |  / \  - No vCards
> Geek Group G-2 #1220
>
>
>