[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SRSG gap spacing?



Original poster: "colin.heath4 by way of Terry Fritz <twftesla-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

the problem with wide gap spacings is the massive stress they can put your
system under and also the gap losses if you have a safety gap and it is not
firing at this wide gap then i would suspect your safety is way too  wide
you will see an increase in performance but at a great cost
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, May 27, 2002 3:57 AM
Subject: SRSG gap spacing?


> Original poster: "Dave Leddon by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<leddon-at-attbi-dot-com>
>
> What is the rational behind maintaining a narrow gap spacing on a SRSG?
> I've seen this recommendation so often in this list that it begins to take
> on the dimension of dogma.  On my coil, as the electrodes wear down and
the
> gap spacing approaches 1/8 inch, the performance actually seems to
improve.
>  In theory a wider gap should reduce the arc dwell time.  So what are the
> advantages?
>
> Dave
>
>
>
>
>