Re: Coil Data for study

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "J. B. Weazle McCreath by way of Terry Fritz <twftesla-at-qwest-dot-net>" <weazle-at-hurontel.on.ca>


At 08:27 AM 19/11/02 -0700, you wrote:
 >
 >Original poster: "Barton B. Anderson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>
 >
 >Hi Weazle,
 >
 >Thank you for sharing your data.  I am very curious about something:
 >Could you measure all 4 wall distances from the center of the coil?
 >This particular area has been of concern to me and an area I need to
 >iron out.
 >
 >Also, have you made recent measurements with the system in its current
 >position?  Would you be up to making a few simple measurements? (I bet
 >you knew I would ask that).
 >
 >Take care,
 >Bart
 >

Hi Bart,

No problem on the measurements...might take a few days, but I'll do it
and get the numbers to you.  One question, though...one of the "walls"
is actually a metal rack which holds firewood, the real wall being at
least 8 feet beyond it.  Do I concider the rack as the "wall" or do I
measure to the real wall?


73, Weazle, VE3EAR/VE3WZL
G-1#1214

Listening: 147.030+ and 442.075+
E-mail:    weazle-at-hurontel.on.ca
            or ve3ear-at-rac.ca
Web site:  http://www.hurontel.on.ca/~weazle