[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ASRG



Original poster: "claude masetto by way of Terry Fritz <twftesla-at-qwest-dot-net>" <claudmas-at-optusnet-dot-com.au>

Hello,
I have just finished building a ASRG for my 4 pack MOT powered coil.
I would like to ask, what are the typical gap spacings and are they
critical. On my static gap the adjustment is critical for good performance.
I am using an 8" dia disc with 4 electrodes, an angle grinder with which I
can vary the speed with a variac.
Thanks
Claude.