[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DC Powered Large Tesla Coils



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Isn't that what Asynchronous Rotary Spark Gap means ? ? ? ?

I guess I did reverse a letter.  Should have been ARSG.

Dan



 > Dan -
 >
 > Did you mean to say "RSG" instead of "ASRG"?
 >
 > With a DC charging system there's no "synchronism" to speak of.
 >
 > Regards,
 > Scott Hanson
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Friday, November 22, 2002 2:32 PM
 > Subject: DC Powered Large Tesla Coils
 >
 >
 >  > Original poster: "Mccauley, Daniel H by way of Terry Fritz
 > <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
 >  >
 >  >
 >  >
 >  > I finally got my High Voltage resonant-mode DC power supply to work
this
 >  > past week and am ready to begin thinking
 >  > how I am going to incorporate this into the DC Tesla Coil I am planning
on
 >  > building.
 >  > Using a dummy load set-up, I managed to get a sustained output of
2000mA
 > at
 >  > 45.5kVDC.  However, I am planning on
 >  > running the supply at a much lower current at about 500mA at 45kVDC.
My
 >  > current plan calls for a large conventional
 >  > type tesla coil running with a large ARSG.
 >  >
 >  > My question is, that I wanted to get some advice, 'lessons learned',
 > etc...
 >  > from people who have already ventured into
 >  > the DC powered tesla coil arena.  I'm current working on some very
 > detailed
 >  > simulations to see the effects of varying
 >  > BPS and cap size is for something like this.
 >  >
 >  > Any advice, comments, appreciated!
 >  >
 >  > Thanks
 >  > Dan
 >  >
 >  >