[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MO Diodes Exchange Rate



Original poster: "Matthew Smith by way of Terry Fritz <twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>

Hi Ken

> I was wondering as I looked into my latest donor oven, are these MO
> diodes worth anything?

They go "pop!" a heckuvalot easier than a string of 1N4007s will - they 
are only rated at about half an Amp, with good luck and a following wind ;-)

For TC use, currents can be just a little bit on the large side for 
these beasties, although I think that they may be OK in latter stages of 
a Cockroft Walton multiplier (not the first stage) - someone please 
correct me if I'm wrong.

Cheers

M

-- 
Matthew Smith            | Business: http://www.kbc-dot-net.au
IT Consultant            | PGP Key:  http://gpg.mss.cx
Kadina, South Australia  | * Tivis Project * Community Connect *