[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: how to's: SRSG



Original poster: "Bill Vanyo by way of Terry Fritz <twftesla-at-qwest-dot-net>" <vanyo-at-echoes-dot-net>

Let me add to the question, as I've been thinking of building one.

1) How is the disk mounted to the motor shaft?  Where to get the
necessary hardware?

2) How to balance if it wobbles?  Shave a little off the heavy side, but
how do you figure out which side that is?

Thanks,
Bill Vanyo

Tesla list wrote:
> 
> Original poster: "R. Bergmann by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<bergmann_-at-hotmail-dot-com>
> 
> I am a little foggy on how exactly to build a SRSG.  Mostly on the
> controller part, and the phasing/start point/degree setting parts.  Some
> people have capacitors hooked onto their srsg's and other don't.  I would
> greatly appreciate a straight forward explination on the contruction and
> workings of a srsg.
> 
> Thanks,
> 
> Ryan