[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: copper rings



Original poster: "Mccauley, Daniel H by way of Terry Fritz <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>



If you look at my conventional coil #1 on my website,
www.spacecatlighting-dot-com, there are pictures showing how i do it.  basically
i made electrode holders out of bolts and the bolts hold the ring in place.

However, i'm not going to pursue that route any further.  I'm simply going
to press fit electrodes into my rotor for now on.

Dan



How does one get a copper ring around the out side of your G10 disk?  Have 
the machine shop do it, or make it yourself?  If I could make it myself, how

would I do it?


Thanks,
Ryan