[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Inexperience was RE: Mad experiment or Re: PDT



Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, September 24, 2002 4:35 PM
Subject: RE: Inexperience was RE: Mad experiment or Re: PDT


> Original poster: "Dave Hartwick by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <ddhartwick-at-earthlink-dot-net>
>
> Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <tesla-at-lists.symmetric-dot-net>
>
> All these "horror" stories are wonderful and such, but don't actually
> educate anybody as to say prevent accidents with a tesla coil. I cannot
> imagine most tesla coils are powered off 3 phase 480 volts factory buss
bar
> with nearly unlimited power levels. Your average tesla coil will not weld
> you into a breaker box, or make you fall off a utility pole while setting
> you on fire.
> >>>>>>>>
> Wow, you are mistaken Ken. Once you start powering with PDTs or MOT
supplies

those are not small 450VA tesla coils. Why not deviate from the original
post even more and state that 138kV transmissions lines are dangerous and
you should not play with them.

KEN