Re: Kynar Wire Secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss by way of Terry Fritz <teslalist-at-qwest-dot-net>" <hweiss-at-new.rr-dot-com>

Hi All,

Kynar might not be a good insulator for HV use as it is piezoelectric.  But
then again, so is Quartz.  If the insulation does have piezoelectric
properties, then the wire might start to move, (or try to) loosening the
wire from the form.  I have built speakers and microphones from the film
version.  Anyone know more about this material?

David E Weiss


 > Original poster: "Vivek Babtiwale by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <dr_vek-at-yahoo-dot-com>
 >
 > Has anyone used Kynar wire or any other heavily
 > insulated wire for the secondary? Seems like varnish
 > would not be unnecessary if heavily insulated wire was used.
 >
 > _
 >
 >
 >