[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Small coil questions?



Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 

Pretty much the same results from 3mm and 6mm tubing (is that inside
diameter or outside...)

Best to make the relative heights of secondary and primary adjustable, so
that you can change it if you discover in testing that you are over or under
coupled.  Some small plastic blocks or sections of plastic pipe might work
well

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, December 07, 2003 10:11 AM
Subject: Re: Small coil questions?


 > Original poster: "Kreso" <kreso.bukvic-at-kc.htnet.hr>
 >
 > Can i use 3 mm copper tubing and obtain same results as with 6 mm?
 > Where should first turn of secondary be? With same level as beginning,
 > middle, end of first turn of primary?
 >
 > Thanks
 >
 >