[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pole pig on ebay



Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net> 

Yeah and shipping is 300$ I bet.

Regards - Jim Mitchell

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, December 07, 2003 6:39 PM
Subject: Pole pig on ebay


 > Original poster: "pjj" <tha3rdman-at-zoominternet-dot-net>
 >
 > no bids for 75 bucks
 >
 >
http://cgi.ebay-dot-com/ws/eBayISAPI.dll?ViewItem&item=2578466266&category=36353
 >
 >
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Sunday, December 07, 2003 1:11 PM
 > Subject: Re: Small coil questions?
 >
 >
 >  > Original poster: "Kreso" <kreso.bukvic-at-kc.htnet.hr>
 >  >
 >  > Can i use 3 mm copper tubing and obtain same results as with 6 mm?
 >  > Where should first turn of secondary be? With same level as beginning,
 >  > middle, end of first turn of primary?
 >  >
 >  > Thanks
 >  >
 >  >
 >  >
 >
 >