Re: new single 833A VTTC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net> 

You run that in your room?!?!?!?!?!???!?!  Ouch!

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, December 21, 2003 11:39 PM
Subject: new single 833A VTTC


 > Original poster: "Steven Ward" <srward16-at-hotmail-dot-com>
 >
 > Hey guys
 >
 > just build a new VTTC the other day with great success.  Whats funny is
 > that just the single 833A does nearly as much as when i had 2 of them on
my
 > old coil... obviously the dual 833A VTTC was NOT optomised.  Im running
the
 > filament a bit hot (10.5-11V) so this may help its performance.  So far it
 > has worked excellent up to 22" of spark.  I can run at 15pps with only a
 > slight redness of the plate. 20 and 30pps is possible at only 18" sparks.
 > Its still rather nice looking though and worked pretty good from the
start.
 > I will add component values to this page later, but check it out:
 >
 > http://www.hot-streamer-dot-com/srward16/833AVTTC.htm
 >
 > There may be some more spark left in it still, if i make any improvements
i
 > will post them ;)
 >
 > Steve Ward
 >
 >