[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Spun Aluminum Toroid Bulk Buy?



Original poster: "Christopher Boden by way of Terry Fritz <teslalist-at-qwest-dot-net>" <chrisboden-at-hotmail-dot-com>

I'm interested in at least a pair, especially in the larger size.



Christopher "Duck" Boden Geek#1
President / C.E.O. / Alpha Geek
The Geek Group
www.thegeekgroup-dot-org
Because the Geek shall inherit the Earth!

Never doubt that a small group of thoughtful, committed citizens can change 
the world. Indeed, it's the only thing that ever has.

Believe those who are seeking the truth; doubt those who find it.
     - André Gide, 1869 - 1951





>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Spun Aluminum Toroid Bulk Buy?
>Date: Tue, 03 Jun 2003 07:11:02 -0600
>
>Original poster: "Dave Kyle by way of Terry Fritz <teslalist-at-qwest-dot-net>" 
><dave-at-kyleusa-dot-com>
>
>
>It has been a at least two years since anyone on the list has done a spun 
>aluminum toroid bulk buy and I was wondering if there was enough pent up 
>demand to make another one worth while. Come on all you folks with High 
>Voltage Disease (HVD) you KNOW you NEED one. J
>
>
>
>I have a beautiful 6 x 24 inch spun aluminum toroid from an earlier bulk 
>buy and lately have been thinking a 9 x 30 inch would be especially nice 
>for my larger coil. I can then migrate the 24 inch to my new DC coil which 
>is currently under construction. IMHO nothing beats a spun toroid for 
>spark performance and appearance. Fact is they look cool even with the 
>power off.
>
>
>
>I have no experience with organizing a buy but if enough people express 
>interest and hopefully some of the previous organizers offer their advice 
>I would be happy to do so. My only interest is getting a big toroid for 
>something less than the grotesquely high single unit price. I have no 
>intention of charging any service fee and will pay what everyone else pays 
>if we can get the bulk buy.
>
>
>
>A previous buy for 9 x 30 spun aluminum toroids had these results:
>
>
>
>What vendor do we typically use? O.W. Landgren
>
>
>
>What is the minimum buy to get to a reasonable cost? ~15
>
>
>
>What is that cost? ~$310 a piece
>
>
>
>We need just 14 more people to make this a reality. Reply to the list or 
>if your prefer contact me directly.
>
>
>
>Dave
>
>=========================================
>Dave Kyle
>Austin, TX USA
>Email: dave-at-kyleusa-dot-com
>
>
>

_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn-dot-com/?page=features/junkmail