[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New SSTC Driver



Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>

Hi Dave,

Wow cool!  I use an RF supply for the same thing but it is heavy, complex, 
and unreliable.  A nice small circuit capable for pumping serious power 
would be great.

I assume it has some type of power or current limiting to protect the thing 
from blowing up.  My RF supply has full output protection so it has lasted 
a long time so far.

Cheers,

         Terry

At 09:13 PM 3/7/2003 -0500, you wrote:
>All
>I'm using a relatively new driver chip for my isolated
>+/-12VDC through a 4kV BIL GDT (think IGBT/FET driver).
>The chip I'm using is a UCC3808A-2 available from
>Digikey for the princely sum of $2.57 ea.
>
>P/N 296-11482-5-ND
>
>One fixed resistor, one pot, one 1.0nF cap and your
>tuneable from 50-300KHz.  Add a GDT and two IGBT's
>you have an open loop 500W SSTC for <20 parts.
>All I can say is WOW.  Plus is tuneable to 1MHz.
>
>Regards
>Dave Sharpe, TCBOR
>Chesterfield, VA. USA