[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: HDPE vs Wood Primary Coil Supports



Original poster: "Edward Wingate by way of Terry Fritz <teslalist-at-qwest-dot-net>" <ewing7-at-rochester.rr-dot-com>

Tesla list wrote:

 > Original poster: "Rod and Patti by way of Terry Fritz 
<teslalist-at-qwest-dot-net>" <rstapivic-at-cfl.rr-dot-com>
 >
 > Iv'e used a garden spray bottle with dawn detergent and water
 > to cool the blade on the jig saw. Its messy but it keeps it cool,
 > also wear some kind of insulating gloves just to be safe.
 >
 > good luck
 > Rod and Patti
 >

All,

Off topic and at the risk of starting another long drawn out thread.

NEVER, EVER wear any type of gloves while operating power shop equipment!!!

Unless, of course you can get along with a finger or two less!

Ed Wingate RATCB