Re: Overhead Transperency Cap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Philip Brinkman" <peeceebee-at-mindspring-dot-com> 

Hey, that sounds good, should work. I've recently made a notebook
capacitor..I used heavy extra heavy duty notebook page protectors, they are
5 mils thick, a LOT easier than the old zip lock bag capacitor I made.


 > [Original Message]
 > From: Tesla list <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Date: 11/20/2003 9:52:33 AM
 > Subject: Re: Overhead Transperency Cap
 >
 > Original poster: "Jim Mitchell" <Wrenchead-at-starband-dot-net>
 >
 > I made a cap with these once, it worked great.
 >
 > Regards - Jim Mitchell
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Wednesday, November 19, 2003 9:48 AM
 > Subject: Overhead Transperency Cap
 >
 >
 >  > Original poster: "margaret louise" <tullera-at-optusnet-dot-com.au>
 >  >
 >  > Hi all
 >  >
 >  > I am considering building an A4 sized plate stack cap using overhead
 >  > transperency shhets as a dielectric.
 >  > Has anyone had any luck/ exeperience with these...or even what theyre
made
 > of.
 >  >
 >  > I also heard somewhere that you can test possible dielectrics for RF
 > losses
 >  > by puting them in the microwave and seeing if they get hot? i deas
anyone?
 >  >
 >  >
 >