Re: Maxwell capacitor question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Tesla729-at-cs-dot-com 

"Tesla list" <tesla-at-pupman-dot-com> wrote:

 >Original poster: "colin.heath4" <colin.heath4-at-ntlworld-dot-com>
 >
 >hi david,
 >             i used the 80nf 100kv version of what you have. it performed
 >well in my 6" coil at 400bps but got warm quickly so the inside must have
 >been very warm.
 >i assume this is due to the high break rate as like you say they are
 >designed for lower break rates.
 >i think they must be mica or mylar if they are so small at this voltage. i
 >dont think they could possibly be polythene or polypropylene.
 >i will be using this same cap in my maggie over the next couple of weeks at
 >this same break rate. so ill let you know how it goes.
 >cheers
 >colin
 >

Hi Colin,

What is the physical size (l x w x h) of this cap?

David