[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Calculating streamer breakout of top-loads



Original poster: "Rikard Titus" <rikard_titus-at-hotmail-dot-com> 




>If fired more often, especially in the TC case of perhaps 120 shots/sec.,
>this would be totally invalid because of all the residuals ions and
>molecules in the air around the terminal.
>
>As an example, we have a 10 inch dia. sec. that produces sparks up to 6.8
>feet long but the actual potential is only 148 kV, ie, in a single shot mode
>the spark length is only approx 8 inches to a ground
How did you manage to determine voltage so preciesly (148 kV?!) ??
Measurment of some sort?
Will you be kind and give more info on secondary size,input power,and 
procedure used on that occassion?

Thanks,
-Rik

_