[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brass bolt for upper connection?

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 

If you use two internal acrylic baffle disks 3 inches in from each end it
won't be a problem.  Also, use a generous amount of silicone RTV over the
bolt head.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913

 > I'm a PVC endcap on the top of my 3 inch coil. Is it ok to put a brass
 > in it and solder the output wire to it so I can attach toroids easier?
 > this make internal flashover a problem?
 > ---Eric