Re: Self Resonant SSTC boards COMPLETE

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Brian Salvo <teslacoiler666-at-prodigy-dot-net> 

Hey, I got a dumb question!
Is there a way for me to design PCBs if I don't know how to design PCBs???
Is there some kind of software out there that will do the thinking for me 
and spit out a PCB layout if I feed it a schematic? It would have to be 
intelligent enough to know how thick to make the traces for the current, 
and would have to know the voltages present to allow for proper spacing I 
assume.

I know it sounds like a tall order, but it doesn't hurt to ask!

Tesla list <tesla-at-pupman-dot-com> wrote:
Original poster: "Jim Lux"

I've used them at work (JPL) and they produced a nice product quickly (the
fact that I had crossing traces on the same layer was my own fault)
----- Original Message -----
From: "Tesla list"
To:
Sent: Friday, April 02, 2004 6:14 PM
Subject: Re: Self Resonant SSTC boards COMPLETE


 > Original poster: Terry Fritz
 >
 > At 03:04 PM 4/2/2004, you wrote:
 > >Its a secret!
 > >
 > >Regards - Jim Mitchell
 >
 > Well that's no fun :-p
 >
 > But Terry has $750 worth of boards on order from ExpressPCB:
 >
 > http://www.expresspcb-dot-com/
 >
 > and is very happy with the free software, service, and finished boards!!!
 >
 > Pals clued me into them an! d they are all very happy with ExpressPCB too...
 >
 > Cheers,
 >
 > Terry
 >
 >