[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Epoxy doesnt work.



Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com> 

Hi,

I was trying to to epoxy the connections I made to my MOTs 0 volt side on 
the HV. It doesnt seem to have worked. Even after 16 hours it is still soft 
in some situations and gummy in the others. Any1 know what the problem is?

<http://www.hydrogen18-dot-com/projectlogs/hivolt/4packmot/>http://www.hydrogen18-dot-com/projectlogs/hivolt/4packmot/

---Eric