Re: A reVOLTing development.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "robert heidlebaugh" <rheidlebaugh-at-desertgate-dot-com> 

DID you re-tune your primary? you should nead about 1/2 the inductance or
about 1/3 less turns.  See if this helps.
    Robert   H
-- 


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Sat, 31 Jul 2004 20:05:21 -0600
 > To: tesla-at-pupman-dot-com
 > Subject: A reVOLTing development.
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Sat, 31 Jul 2004 20:07:32 -0600
 >
 > Original poster: "Christopher 'CajunCoiler' Mayeux" <cajuncoiler-at-cox-dot-net>
 >
 > Today, I attempted to make an upgrade to my 4.5" coil
 > to get more "bang" from each discharge... this upgrade
 > consisted of re-wiring my MMC to use 2 strings of 14
 > caps (21.43nf), as opposed to the 1 string of 17 (8.82nf)
 > that I've been using.
 >
 > According to all the coil modeling programs I've
 > collected (including my own utilities), I only needed
 > to re-tap the primary to 9.5 turns to make it work with
 > the larger MMC... well, I made all the mods, including
 > re-tapping the primary, and instead of getting more
 > "bang", it just sat there with the main spark gap making
 > sputtering noises, and an occasional firing of the
 > safety gaps.
 >
 > Unless someone has a better idea, I'll be spending my
 > Sunday re-wiring the MMC to 8.82nf ... the streamers
 > were maxing out at 28" but it's better than no streamers
 > at all.
 > ---
 > Depressed in Chalmette, LA
 > CajunCoiler.
 >
 >