[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
JavaTC and Coil Design
Original poster: G <bog-at-cinci.rr-dot-com>
I have been running some numbers on JavaTC for a new coil design, and have
run into a slight problem. I am having trouble satisfying a secondary
winding ratio of 4.5:1 or 5:1 with Malcom's recommendation of a wire 6 skin
depths thick, and with John Freau's recommendation of 1200-1500 turns. Does
anyone have thoughts on which of these are most critical to satisfy?
"Without ZIM, I am lost."