[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Secondary form coating.
Original poster: "John Richardson" <jprich-at-up-dot-net>
Anyone ever use the clearcoat used in base-clear auto finishes?
> I use Fiber glass resin, but I have had a problen of my windings breaking
> loose in cold temp. so I now spray my coils with clear spray to stick the
> coil to the PVC before I coat the coil. I guess that you could have the
> same problem. The plastic dip may not bond well to PVC with no pre-coat.
> Robert H