[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Toroid construction hints



Original poster: "Peter Terren" <pterren1-at-iinet-dot-net.au> 

I have only ever had flexible ducting for all my small coils and a truck
inner tube for the larger one.  They have allowed me to use large double
toroids without much cost and all bounce exceedingly well.  I am just about
to receive my very first spun aluminium toroid. I believe these bounce
exceedingly badly.
Cheers
Peter (Tesla Downunder)
http://members.iinet-dot-net.au/~pterren

 > Original poster: John <fireba8104-at-yahoo-dot-com>
 > It seems most of us have a love-hate relationship with corrugated ducting.
 > This relationship is understandable,they're cheap but they dent with ease.
 > I for one, can feel sympathetic to those who have lost a decent topload to
 > this annoyance. I have felt your pain! My first topload was the standard
 > corrugated ducting, and as you may have already divined, it looked like a
 > boxer after 15 rounds. In order to cure my woes, I decided to try an
 > experiment. Instead of using rigid corrugated ducting I procured the
 > flexible type. The topload was constructed with the use of a center disk
 > for spacing and aluminum tape for support. Without conviction, I can say
 > that this topload has been to my floor and back many a time. A bad picture
 > is at
 >
<http://www.geocities-dot-com/fireba8104/topload01.jpg>http://www.geocities-dot-com/
fireba8104/topload01.jpg
 > Enjoy,
 > John