[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: resonant vs LTR



Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


You need to stay a distance from the resonance value.  NST's will not
survive very long at res.   Best to use the ltr value which is normally
approx 1.5 x res value.

Dr. Resonance

 >
 > in the teslamap program the resonant tank cap for my
 > transformer (15\30-240v\50hz) is shown as 6.8nf and
 > the LTR cap is shown as 8.9nf. is it acceptable to use
 > a cap value somewhere in between\including these two
 > values or is it either\or with no in between?
 >
 > regards
 > richard
 > aus.
 >
 >
 >