[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Help with primary coil design.
Original poster: Tom Stathes <newphreak_16-at-yahoo-dot-com>
Just a quick question.
I need a little help with primary coil design.
If my secondary is 4.5in what should the inner
diameter of my primary coil be. Assuming it is a flat
pancake type primary.
The tank transformer is a big 4kv plate transformer
that i have. (I will ballast it to 1.5kw but it can do
much more). For a tank cap i have 4 .052uf 11kvdc caps
that i will parallel.
Thanks in advance,