[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Secondary size
Original poster: "J Dow" <jdowphotography-at-hotmail-dot-com>
method to the madness...hmmm... well I used a lot of trial and error.
what I did was to choose a number of turns, wind a half inch count the
number of turns and find out how tall the sec coil will need to be. The
other thing I considered was that the height for nearly all other coils in
my power range are very close.
oh and I forgot to mention that because my sec coil is so tall I now use a
45*cone pri coil. (better coupling)
works like a freaking champ!
Read you later