[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Secondary coil form material



Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 

Polystyrene is one of the best for RF work.  Also fiberglass (Extren) works
very well.  Be sure to sand throughly inside and out and coat with 3
separate coats of Glyptal or other good insulator prior to winding.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
 >
 > What are some of the better commonly used coil for materials.
 > PVC is what I would like to use simply for availability.
 > But from what I have read PVC has a high dissipation factor.
 >
 > Has any one designed a system with PVC and the changed no other aspects of
 > it but to wind an identical secondary on say Polyethylene or some other
 > material?
 >
 > If so what were the results?
 >
 > How much would my arc out put suffer if I used PVC?
 >
 > Luke Galyan
 > Bluu-at-cox-dot-net
 >
 >
 >
 >