[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SRSG or ARSG
Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
Not yet. I hope to keep them below $150.00.
Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo WI 53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
Sent: Sunday, January 18, 2004 11:08 PM
Subject: Re: SRSG or ARSG
> Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
> Hi Dr R.
> Do you have a price estimate for your 16KV 250ma transformer?
> Gerry R.
> > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
> > The ideal NST design for TC work would be a core/coil assembly that can
> > dropped into a tank of oil. I'm working on this solution at present
> > hope to offer a nice 16 kV design at 250 mA --- with a shunt that can
> > moved depending on the amount of current you need to power the caps. I
> > envision a phenolic top to which the xmfr core/coil is attached on
> > extension tubes so that the xmfr is lowered into the oil when the top
> > attached. I would fit a small plug that could be used for vacuum
> > to get all the bubbles out.
> > The shunt would be adjustable from 100 mA to 300 mA to adjust current
> > the cap value.
> > With luck this project will be done by Mar 04.
> > Dr. Resonance
> > Resonance Research Corporation
> > E11870 Shadylane Rd.
> > Baraboo WI 53913