[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RSG motor



Original poster: DRIEBEN-at-midsouth.rr-dot-com 

Steve,

I think this motor would work just fine for an SRSG for the
size of the disc and only 4 rotory electrodes assuming that
the electrodes are not too massive. I would think that even
1/4" dia x 2" long tungsten rotory electrodes should work
fine.

David Rieben

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
Date: Saturday, January 24, 2004 0:46 am
Subject: RSG motor

 > Original poster: "steve" <steve_vance-at-cablelynx-dot-com>
 >
 > Hi all, Could someone tell me if this motor would be
 > suitable for a srsg? I'm going to have a 6x3/8 in G10 disk
 > with 4 spinning and 2 stationary electrodes for .
 > Is this to much weight for 1/8hp?
 >
 > 
<http://www.surpluscenter-dot-com/item.asp?UID=2004012219391417&item=10-1797&catname=electric>http://www.surpluscenter-dot-com/item.asp?UID=2004012219391417&item=10-1797&catname=electric
 >
 > Steve
 >
 >
 >