[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Depotting electronic NSTs



Original poster: "Arpit Thomas" <arpit-at-inzo-dot-org> 

http://www.aerias-dot-org/kview.asp?DocId=80&spaceid=1&subid=9
might help

*********** REPLY SEPARATOR  ***********

On 16/07/2004 at 8:00 AM Tesla list wrote:

 >Original poster: "mercurus2000" <mercurus2000-at-cox-dot-net>
 >
 >What's a cheap source for that?
 >
 >
 >----- Original Message -----
 >From: "Tesla list" <tesla-at-pupman-dot-com>
 >To: <tesla-at-pupman-dot-com>
 >Sent: Thursday, July 15, 2004 9:39 PM
 >Subject: RE: Depotting electronic NSTs
 >
 >
 > > Original poster: "Tom Luttrell PWRCOM" <tom-at-pwrcom-dot-com.au>
 > >
 > > Methylene chloride should do the trick.
 > >
 > >  > -----Original Message-----
 > >  > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > >  > Sent: Friday, 16 July 2004 04:07
 > >  > To: tesla-at-pupman-dot-com
 > >  > Subject: Depotting electronic NSTs
 > >  >
 > >  > Original poster: "mercurus2000" <mercurus2000-at-cox-dot-net>
 > >  >
 > >  > Sorry that this is slightly off topic, but I was wondering
 > >  > what type of
 > >  > solvent would dissolve the high voltage potting in the
 > >  > electronic NSTs?
 > >  > I've tried soaking it in acetone, but it only melted the
 > >  > plastic shell.
 > >  > Thanks,
 > >  >     Adam
 > >  >
 > >  >
 > >  >
 > >  >
 > >
 > >
 > >