[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AWG 10 magnet wire sources?



Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 

At 11:56 AM 7/28/2004 -0600, you wrote:
>Original poster: "David Rieben" <drieben-at-midsouth.rr-dot-com>
>Hi Jim,
>
>Try your local electric motor and/or transformer rebuild shop.
>They will usually sell you wire at their cost and for no more
>than your needing this would be your best bet.
>
>David R.


Called a few, but AWG10's pretty big..


>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Wednesday, July 28, 2004 8:04 AM
>Subject: AWG 10 magnet wire sources?
>
>
> > Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
> >
> > I'm looking for a source for AWG 10 magnet wire.  Any kind of insulation
>is
> > fine, but some coating is needed.  Probably only need 30-50 feet of the
> > stuff (it's for an RF matching network).
> >
> >