[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AWG 10 magnet wire sources?
Original poster: "Ed Phillips" <evp-at-pacbell-dot-net>
Tesla list wrote:
> Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
> At 11:56 AM 7/28/2004 -0600, you wrote:
> >Original poster: "David Rieben" <drieben-at-midsouth.rr-dot-com>
> >Hi Jim,
> >Try your local electric motor and/or transformer rebuild shop.
> >They will usually sell you wire at their cost and for no more
> >than your needing this would be your best bet.
> >David R.
> Called a few, but AWG10's pretty big..
> >----- Original Message -----
> >From: "Tesla list" <tesla-at-pupman-dot-com>
> >To: <tesla-at-pupman-dot-com>
> >Sent: Wednesday, July 28, 2004 8:04 AM
> >Subject: AWG 10 magnet wire sources?
> > > Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
> > >
> > > I'm looking for a source for AWG 10 magnet wire. Any kind of insulation
> > > fine, but some coating is needed. Probably only need 30-50 feet of the
> > > stuff (it's for an RF matching network).
> > >
> > >
You can get it at any hardware store around here. Depending on the
store perhaps 15 cents/foot with THNN insulation.